Select Git revision
auth-service.md
rdcu_rmap.c 16.83 KiB
/**
* @file rdcu_rmap.c
* @author Armin Luntzer (armin.luntzer@univie.ac.at),
* @date 2018
*
* @copyright GPLv2
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* @brief RMAP RDCU link interface
* @see FPGA Requirement Specification PLATO-IWF-PL-RS-005 Issue 0.7
*
*
* Ideally, we would use asynchronous operations here, with a transaction log
* that is served by another thread. However, we cannot assume that such
* features will be available, so we'll do this by maintaining a mirror of the
* RDCU's registers and memory, where instead of actively blocking with get()
* and set() RMAP calls, they operate on the local copy and the user issues
* sync() calls.
*
* To monitor the syncronisation status, we maintaining a transaction log
* tracking the submitted command set. Response packets could be processed
* by interrupt (or thread), but in this variant, we process the return packets
* when the user calls rdcu_ctrl_sync_status()
*
* This is probably the nicest solution when it comes to call overhead, but it
* requires 8 MiB of memory for the SRAM mirror and the some for the registers.
*
* Note that for simplicity , we assume that there is a working heap allocator
* available, please adapt all malloc/free calls to your needs, or ask us
* to do that for you.
*
* NOTE: in order to run this on the GR712RC eval board, we set the SRAM mirror
* image to the boards SDRAM in rdcu_ctrl_init() and just malloc() it for
* the PC (see rdcu_ctrl_init)
*
* The interface requires that you provide an RX and a TX function,
* see rdcu_ctrl_init for the call interface.
* The TX function shall to return 0 on success, everything else
* is considered an error in submission. The RX function shall return
* the size of the packet buffer and accept NULL as call argument, on
* which it shall return the buffer size required to store the next
* pending packet.
* You can use these functions to adapt the actual backend, i.e. use
* your particular SpW interface or just redirect RX/TX to files
* or via a network connection.
*
* NOTE: We don't have to serve more than one RDCU at any given time, so we
* track addresses and paths internally in a single instance. This also
* makes the interface less cluttered. Besides, I'm lazy.
*
*
* @warn when operational, we expect to have exclusive control of the SpW link
*
* TODO: RMAP command response evaluation
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <byteorder.h>
#include <rmap.h>#include <rdcu_rmap.h>
static uint8_t rdcu_addr;
static uint8_t icu_addr;
static uint8_t *dpath; /* destination path (to the RDCU) */
static uint8_t *rpath; /* return path (to the ICU) */
static uint8_t dpath_len;
static uint8_t rpath_len;
static uint8_t dst_key; /* destination command key */
/* generic calls, functions must be provided to init() */
static int32_t (*rmap_tx)(const void *hdr, uint32_t hdr_size,
const uint8_t non_crc_bytes,
const void *data, uint32_t data_size);
static uint32_t (*rmap_rx)(uint8_t *pkt);
static int data_mtu; /* maximum data transfer size per unit */
/* For now we maintain a simple transaction log that works like this:
* we allow up to 128 transfers, simply because this is how many response
* packets the GRSPW2 SpW descriptor table can hold at any one time without
* blocking the link.
*
* Every time a new transfer is to be submitted, we grab the first free
* slot we encounter in the "in_use" array and use the index as the transaction
* identifier of the RMAP packet. (Yes, this is potentially slow, as we may have
* to iterate over the whole array every time if we're very busy with
* transmissions, so there is room for improvement.)
*
* Every time a slot is retrieved, the "pending" counter is incremented to
* have a fast indicator of the synchronisation status, i.e. if "pending"
* is not set, the synchronisation procedure is complete and the local data may
* be read, or the remote data has been written and further commands may may
* be issued.
*
* The local (mirror) start address of the requested remote address is stored
* into the same slot in the "local_addr" array, so we'll know where to put the
* data if we issue an RMAP_read command. This may be omitted for write
* commands.
*
* Every time a response packet is received, the data (if any) is written to the
* local address, using the length specified by RMAP packet, so be careful where
* you place your buffers or registers. On success, the "in_use" slot is cleared
* and the pending counter is improved.
*
* XXX: careful, no locking is used on any of the log data, so this is
* single-thread-use only!
*
*/
#define TRANS_LOG_SIZE 64 /* GRSPW2 TX descriptor limit */
static struct {
uint8_t in_use[TRANS_LOG_SIZE];
void *local_addr[TRANS_LOG_SIZE];
int pending;
} trans_log;
/**
* @brief grab a slot in the transaction log
*
* @param local_addr the local memory address
*
* @returns -1 on no slots, >= 0 for the transaction id
*/
static int trans_log_grab_slot(void *local_addr)
{
int i;
int slot = -1;
for (i = 0; i < TRANS_LOG_SIZE; i++) {
if (trans_log.in_use[i])
continue;
/* got one */
slot = i;
trans_log.in_use[slot] = 1;
trans_log.local_addr[slot] = local_addr;
trans_log.pending++;
break;
}
return slot;
}
/**
* @brief release a slot in the transaction log
*
* @param slot the id of the slot
*
*/
static void trans_log_release_slot(int slot)
{
if (slot < 0)
return;
if (slot >= TRANS_LOG_SIZE)
return;
if (!trans_log.in_use[slot])
return;
trans_log.in_use[slot] = 0;
trans_log.pending--;
}
/**
* @brief get the local address for a slot
*
* @param slot the id of the slot
*
* @returns the address or NULL if not found/slot not in use
*/
static void *trans_log_get_addr(int slot)
{
if (slot < 0) return NULL;
if (slot >= TRANS_LOG_SIZE)
return NULL;
if (!trans_log.in_use[slot])
return NULL;
return trans_log.local_addr[slot];
}
/**
* @brief n rmap command transaction
*
* @returns number of packets processed or < 0 on error
*/
static int rdcu_process_rx(void)
{
int n;
int cnt = 0;
uint32_t *local_addr;
uint8_t *spw_pckt;
struct rmap_pkt *rp;
if (!rmap_rx)
return -1;
/* process all pending responses */
while ((n = rmap_rx(NULL))) {
/* we received something, allocate enough space for the packet */
spw_pckt = (uint8_t *) malloc(n);
if (!spw_pckt) {
printf("malloc() for packet failed!\n");
return -1;
}
/* read the packet */
n = rmap_rx(spw_pckt);
if (!n) {
printf("Unknown error in rmap_rx()\n");
free(spw_pckt);
return -1;
}
cnt++;
if (0)
rmap_parse_pkt(spw_pckt);
/* convert format */
rp = rmap_pkt_from_buffer(spw_pckt);
free(spw_pckt);
if (!rp) {
printf("Error converting to RMAP packet\n");
continue;
}
local_addr = trans_log_get_addr(rp->tr_id);
if (!local_addr) {
printf("warning: response packet received not in "
"transaction log\n");
rmap_erase_packet(rp); continue;
}
if (rp->data_len) {
memcpy(local_addr, rp->data, rp->data_len);
#if __LITTLE_ENDIAN
if (rp->data_len & 0x3)
printf("warning: length of response packet"
"received is not a multiple of 4 bytes\n");
{
uint32_t i;
for (i = 0; i < rp->data_len/4; i++)
be32_to_cpus(&local_addr[i]);
}
#endif /* __LITTLE_ENDIAN */
}
trans_log_release_slot(rp->tr_id);
rmap_erase_packet(rp);
}
return cnt;
}
/**
* @brief submit an rmap command transaction
*
* @param cmd the rmap command
* @param cmd_size the size of the rmap command
* @param data the payload (may be NULL)
* @param data_size the size of the payload
*
* @returns 0 on success, otherwise error
*/
int rdcu_submit_tx(const uint8_t *cmd, int cmd_size,
const uint8_t *data, int data_size)
{
/* try to process pending responses */
rdcu_process_rx();
if (!rmap_tx)
return -1;
if (0)
printf("Transmitting RMAP command\n");
if (rmap_tx(cmd, cmd_size, dpath_len, data, data_size)) {
printf("rmap_tx() returned error!\n");
return -1;
}
return 0;
}
/**
* @brief generate an rmap command packet
*
* @param trans_id a transaction identifier
*
* @param cmd the command buffer; if NULL, the function returns the needed size
*
* @param rmap_cmd_type the rmap command type of the packet
*
* @param addr the address to read from or write to
* * @param size the number of bytes to read or write
*
* @returns the size of the command data buffer or 0 on error
*/
int rdcu_gen_cmd(uint16_t trans_id, uint8_t *cmd,
uint8_t rmap_cmd_type,
uint32_t addr, uint32_t size)
{
int n;
struct rmap_pkt *pkt;
pkt = rmap_create_packet();
if (!pkt) {
printf("Error creating packet\n");
return 0;
}
rmap_set_dst(pkt, rdcu_addr);
rmap_set_src(pkt, icu_addr);
rmap_set_dest_path(pkt, dpath, dpath_len);
rmap_set_reply_path(pkt, rpath, rpath_len);
rmap_set_key(pkt, dst_key);
rmap_set_cmd(pkt, rmap_cmd_type);
rmap_set_tr_id(pkt, trans_id);
rmap_set_data_addr(pkt, addr);
rmap_set_data_len(pkt, size);
/* determine header size */
n = rmap_build_hdr(pkt, NULL);
if (!cmd) {
rmap_erase_packet(pkt);
return n;
}
bzero(cmd, n);
n = rmap_build_hdr(pkt, cmd);
rmap_erase_packet(pkt);
return n;
}
/**
* @brief submit a sync command
*
* @param fn the RDCU command generation function
* @param addr the local address of the corresponding remote address
* @param data_len the length of the data payload (0 for read commands)
*
* @return 0 on success, otherwise error
*/
int rdcu_sync(int (*fn)(uint16_t trans_id, uint8_t *cmd),
void *addr, int data_len)
{
int n;
int slot;
uint8_t *rmap_cmd;
uint8_t *data = addr;
slot = trans_log_grab_slot(addr);
if (slot < 0)
return -1;
/* determine size of command */
n = fn(slot, NULL);
rmap_cmd = (uint8_t *) malloc(n);
if (!rmap_cmd) {
printf("Error allocating rmap cmd");
return -1;
}
/* now fill actual command */
n = fn(slot, rmap_cmd);
if (!n) {
printf("Error creating command packet\n");
free(rmap_cmd);
return -1;
}
#if __LITTLE_ENDIAN
if (data_len & 0x3)
printf("warning: length of send packet is not a multiple of "
"4 bytes\n");
if (data_len) {
int i;
data = (uint8_t *) malloc(data_len);
for (i = 0; i < data_len/4; i++)
((uint32_t *)data)[i] =
cpu_to_be32(((uint32_t *)addr)[i]);
}
#endif /* __LITTLE_ENDIAN */
n = rdcu_submit_tx(rmap_cmd, n, data, data_len);
free(rmap_cmd);
#if __LITTLE_ENDIAN
free(data);
#endif /* __LITTLE_ENDIAN */
return n;
}
/**
* @brief submit a data sync command
*
* @param fn a RDCU data transfer generation function
* @param addr the remote address
* @param data the local data address
* @param data_len the length of the data payload
* @param read 0: write, otherwise read
*
* @return 0 on success, < 0: error, > 0: retry
*
* @note this one is a little redundant, but otherwise we'd have a lot of
* unused parameters on most of the control functions
*
* XXX need a paramter for read...meh...must think of something else
*/
int rdcu_sync_data(int (*fn)(uint16_t trans_id, uint8_t *cmd,
uint32_t addr, uint32_t data_len),
uint32_t addr, void *data, uint32_t data_len, int read)
{ int n;
int slot;
uint8_t *rmap_cmd;
rdcu_process_rx();
slot = trans_log_grab_slot(data);
if (slot < 0) {
if (0)
printf("Error: all slots busy!\n");
return 1;
}
/* determine size of command */
n = fn(slot, NULL, addr, data_len);
rmap_cmd = (uint8_t *) malloc(n);
if (!rmap_cmd) {
printf("Error allocating rmap cmd");
return -1;
}
/* now fill actual command */
n = fn(slot, rmap_cmd, addr, data_len);
if (!n) {
printf("Error creating command packet\n");
free(rmap_cmd);
return -1;
}
if (read)
n = rdcu_submit_tx(rmap_cmd, n, NULL, 0);
else
n = rdcu_submit_tx(rmap_cmd, n, data, data_len);
free(rmap_cmd);
return n;
}
/**
* @brief create a complete package from header and payload data including CRC8
*
* @note this is a helper function to generate complete binary RMAP packet dumps
*
* @param blob the blob buffer; if NULL, the function returns the needed size
*
* @param[in] cmd an rmap command buffer
* @param[in] cmd_size the size of the rmap command buffer
* @param[in] non_crc_bytes leading bytes in the header not path of the CRC
* @param[in] data a data buffer (may be NULL)
* @param[in] data_size the size of the data buffer (ignored if data is NULL)
*
* @returns the size of the blob or 0 on error
*/
int rdcu_package(uint8_t *blob,
const uint8_t *cmd, int cmd_size,
const uint8_t non_crc_bytes,
const uint8_t *data, int data_size)
{
int n;
int has_data_crc = 0;
struct rmap_instruction *ri;
if (!cmd_size) {
blob = NULL;
return 0;
}
/* allocate space for header, header crc, data, data crc */
n = cmd_size + 1;
ri = (struct rmap_instruction *) &cmd[non_crc_bytes + RMAP_INSTRUCTION];
/* see if the type of command needs a data crc field at the end */
switch (ri->cmd) {
case RMAP_READ_MODIFY_WRITE_ADDR_INC:
case RMAP_WRITE_ADDR_SINGLE:
case RMAP_WRITE_ADDR_INC:
case RMAP_WRITE_ADDR_SINGLE_VERIFY:
case RMAP_WRITE_ADDR_INC_VERIFY:
case RMAP_WRITE_ADDR_SINGLE_VERIFY_REPLY:
case RMAP_WRITE_ADDR_INC_VERIFY_REPLY:
has_data_crc = 1;
n += 1;
break;
default:
break;
}
if (data)
n += data_size;
if (!blob)
return n;
memcpy(&blob[0], cmd, cmd_size);
blob[cmd_size] = rmap_crc8(&cmd[non_crc_bytes],
cmd_size - non_crc_bytes);
if (data) {
memcpy(&blob[cmd_size + 1], data, data_size);
blob[cmd_size + 1 + data_size] = rmap_crc8(data, data_size);
} else {
/* if no data is present, data crc is 0x0 */
if (has_data_crc)
blob[cmd_size + 1] = 0x0;
}
return n;
}
/**
* @brief sets the logical address of the RDCU
* @param addr the address
*/
void rdcu_set_destination_logical_address(uint8_t addr)
{
rdcu_addr = addr;
}
/**
* @brief sets the logical address of the ICU
* @param addr the address */
void rdcu_set_source_logical_address(uint8_t addr)
{
icu_addr = addr;
}
/**
* @brief set the destination path to the RDCU
* @param path a byte array containing the path (may be NULL)
* @param len the number of elements in the array
*
* @returns 0 on success, otherwise error
*
* @note the path array is taken as a reference, make sure to keep it around
* the maximum length of the path is 15 elements
* setting either path NULL or len 0 disables destination path addressing
*/
int rdcu_set_destination_path(uint8_t *path, uint8_t len)
{
if (len > RMAP_MAX_PATH_LEN)
return -1;
if (!path || !len) {
dpath = NULL;
dpath_len = 0;
return 0;
}
dpath = path;
dpath_len = len;
return 0;
}
/**
* @brief set the return path to the ICU
* @param path a byte array containing the path (may be NULL)
* @param len the number of elements in the array
*
* @returns 0 on success, otherwise error
*
* @note the path array is taken as a reference, make sure to keep it around
* the maximum length of the path is 12 elements
* the number of elements must be a multiple of 4 (due to RMAP protocol)
* setting either path NULL or len 0 disables return path addressing
*/
int rdcu_set_return_path(uint8_t *path, uint8_t len)
{
if (len > RMAP_MAX_REPLY_PATH_LEN)
return -1;
if (!path || !len) {
rpath = NULL;
rpath_len = 0;
return 0;
}
rpath = path;
rpath_len = len;
return 0;
}
/** * @brief set the destination command key to use
*
* @param key the destination key
*/
void rdcu_set_destination_key(uint8_t key)
{
dst_key = key;
}
/**
* @brief get the RDCU <-> ICU mirror RMAP synchronisation status
*
* @returns 0: synchronised, > 0: operations pending
*/
int rdcu_rmap_sync_status(void)
{
/* try to process pending responses */
rdcu_process_rx();
return trans_log.pending;
}
/**
* @brief reset all entries in the RMAP transaction log
*/
void rdcu_rmap_reset_log(void)
{
bzero(trans_log.in_use, TRANS_LOG_SIZE);
trans_log.pending = 0;
}
/**
* @brief initialise the rdcu control library
*
* @param mtu the maximum data transfer size per unit
*
* @param rmap_tx a function pointer to transmit an rmap command
* @param rmap_rx function pointer to receive an rmap command
*
* @note rmap_tx is expected to return 0 on success
* rmap_rx is expected to return the number of packet bytes
*
* @returns 0 on success, otherwise error
*/
int rdcu_rmap_init(int mtu,
int32_t (*tx)(const void *hdr, uint32_t hdr_size,
const uint8_t non_crc_bytes,
const void *data, uint32_t data_size),
uint32_t (*rx)(uint8_t *pkt))
{
if (!tx)
return -1;
if (!rx)
return -1;
rmap_tx = tx;
rmap_rx = rx;
data_mtu = mtu;
return 0;
}